I regularly print teleman but my caladius is a recast because it looks like a bitch to print, if I had a fail with that much resin there might be crying.
Just want to chime in and say that the one that can be found on the purple site printed for me no problem as a complete resin noob using autosupports on chitubox. In fact, it was so easy I did it twice!
My ex-husband had to stop pissing into empty water bottles when gaming rather than going to the toilet... should have been my first red flag, but I thought it was a carnival.
Not so much bottles but in the shower. Figure you save a flush and it all goes the same place and the sheer volume of water used in a shower it's going to get washed away and the shower spray after every shower keeps it clean anyway.
Exactly, it was the same during lockdown with that guy who started stabbing everyone, the police show up and shot hik and everyone started losing their minds of the fact he got shot. Nevermind all the fecking people he stabbed
Agreed. The place I'm at did similar. But there's somebody here who actually hits over 300% every month without fail. And yes. He's 100% fiddling something and it's not legit in the slightest. But we worked out he takes home about 4k in bonus alone.
Does he work on fleet vans where pads and discs get authorized straight away no questions asked? Is he giving the gaffer gammys so he gets the time for all the fly in tech jobs? Does he rattle services while clocked on MOT's that don't even make it onto a ramp? Is the bottom drawer of his toolbox full of new oil filters and spark plugs?
Bottom rung tech at a stealership making 30k basic, North of the border though so lower col than England. Think the pay scale is 34 for service tech, 38 for diag tech and 42 for master tech.
This is called glazing. Pads are getting too hot. If one side is hotter then the other, check to make sure an e-brake cable isn't seized on one side. Brakes should be serviced (cleaned and lubed) every 6 months to a year.
This is the information OP, to add to it you can deglaze pads by lapping them with 200 grit on a flat surface, when you put them back together a thin surface of ceramic brake paste on the little wings that make contact with the carrier is a good practise.
A shower every morning is a must. A show before bed depends on the day I just had. A standard office day, no shower. Working in the yard, going for a cycle etc etc then I'll shower before bed.
Get out of bed 8 minutes before I'm in the car to work, enough time to pee lady style for 2 minutes while brushing teeth then wash face, get dressed and out the door.
This was maybe the single funniest moment of the show for me as a kid. Everytime I went to the hardware store I'd try to put a soda can in the paint shaker.
I ate this in Siem Reap, Cambodia. The ants were barely noticeable in the dish but they did add a nice subtle citrus flavor. I did have to floss a few ant legs from my teeth that night, though!
I had this, also in Siem Reap but it was saucier. Lovely place called Mahob Cuisine, could not finish it after cycling all day but my partner (she had the fish) liked it and was happily munching away until I commented on the ants, didn't eat another bite after she looked closer at what she was actually eating and realised it was ants.
You don't need a Fluke, they are nice and yes I got a 115 on my wishlist but a lot of what you are paying for is the fact that it's industry standard to use a specific fluke meter in a lot of documented procedures (armed forces and such) which makes no difference to you or I.
3d printing?
I regularly print teleman but my caladius is a recast because it looks like a bitch to print, if I had a fail with that much resin there might be crying.
Just want to chime in and say that the one that can be found on the purple site printed for me no problem as a complete resin noob using autosupports on chitubox. In fact, it was so easy I did it twice!
Peace less hover buffer? That's the one I got. Might give it a shot this weekend, just solid it must be nearly a full 1kg bottle of resin?
My ex-husband had to stop pissing into empty water bottles when gaming rather than going to the toilet... should have been my first red flag, but I thought it was a carnival.
Not so much bottles but in the shower. Figure you save a flush and it all goes the same place and the sheer volume of water used in a shower it's going to get washed away and the shower spray after every shower keeps it clean anyway.
The Bluesmobile Strategy?
Buy and drive shit boxes until they become uneconomical to repair.
Sold as seen, once they have the car and you have the money that's it.
Exactly, it was the same during lockdown with that guy who started stabbing everyone, the police show up and shot hik and everyone started losing their minds of the fact he got shot. Nevermind all the fecking people he stabbed
Unfortunately it's the same shite, apparently cunt got his asylum knocked back so rammed a polis van then started chasing the officers that got out.
Could 3d print and paint a logo ~720 times for that.
Am I cool yet?
When you drop five digits on a toolbox, part of it is for the bragging rights. /s
Yeah it's a crazy nice box but I will stick with my Kirkland redline jobbie and zero tool debt.
They only talk about the 7 rings Sauron made that worked. These are all the ones that didn’t.
17*
Agreed. The place I'm at did similar. But there's somebody here who actually hits over 300% every month without fail. And yes. He's 100% fiddling something and it's not legit in the slightest. But we worked out he takes home about 4k in bonus alone.
Does he work on fleet vans where pads and discs get authorized straight away no questions asked? Is he giving the gaffer gammys so he gets the time for all the fly in tech jobs? Does he rattle services while clocked on MOT's that don't even make it onto a ramp? Is the bottom drawer of his toolbox full of new oil filters and spark plugs?
Bottom rung tech at a stealership making 30k basic, North of the border though so lower col than England. Think the pay scale is 34 for service tech, 38 for diag tech and 42 for master tech.
Bring back Pangea.
This is called glazing. Pads are getting too hot. If one side is hotter then the other, check to make sure an e-brake cable isn't seized on one side. Brakes should be serviced (cleaned and lubed) every 6 months to a year.
This is the information OP, to add to it you can deglaze pads by lapping them with 200 grit on a flat surface, when you put them back together a thin surface of ceramic brake paste on the little wings that make contact with the carrier is a good practise.
A shower every morning is a must. A show before bed depends on the day I just had. A standard office day, no shower. Working in the yard, going for a cycle etc etc then I'll shower before bed.
Get out of bed 8 minutes before I'm in the car to work, enough time to pee lady style for 2 minutes while brushing teeth then wash face, get dressed and out the door.
This was maybe the single funniest moment of the show for me as a kid. Everytime I went to the hardware store I'd try to put a soda can in the paint shaker.
Have never laughed so hard at TV in my life as I did seeing this for the first time as a kid.
Love song
Mechanic. Not trying to rip you off. Trying to get as much work done as possible to keep productivity up so maybe I make bonus.
Okay firstly how dare you and secondly nice minis.
Thx sweet 17 aye seems almost like a wild number to collect is it mostly in 40k or aos
1 30k, 2 Aos, 4 MESBG, 10 40k.
[удалено]
Keep going. I love the movies and love the books, both have bits I wish were in the other one.
Fuck me you have no idea how frustrating it is.
"you can get forensics off this"
Cant tell if the lady in the back is judgemental or checking it out.
I thought it was the painting from Ghostbusters.
Might be easier to disconnect the line and just pump it out then flush it with water.
Just pull the pump and it will be empty in about 4 seconds, you also won't be pumping viscous stuff through a pump meant for screenwash.
Doesn't matter what side you are on the debate, this ain't okay. That's a brave officer who stopped it and hope he's recognised for it.
She will. Dude had a bunch of bags of weed in the car so it's a good one.
And was thinking it could be an emergency but that saw the licence plate and and it removed all doubt he was anything else other than a cock.
I assumed them same until I realised he is actually flashing Morse code.
I ate this in Siem Reap, Cambodia. The ants were barely noticeable in the dish but they did add a nice subtle citrus flavor. I did have to floss a few ant legs from my teeth that night, though!
I had this, also in Siem Reap but it was saucier. Lovely place called Mahob Cuisine, could not finish it after cycling all day but my partner (she had the fish) liked it and was happily munching away until I commented on the ants, didn't eat another bite after she looked closer at what she was actually eating and realised it was ants.
We'll that's the problem. He wouldn't replace the wires. He would just glob some silicone sealer over the holes if someone was looking.
"You diag'd my misfire now my radio sounds like shit"
What full kit (multimeter included) do you recommend for a DIYer then?
You don't need a Fluke, they are nice and yes I got a 115 on my wishlist but a lot of what you are paying for is the fact that it's industry standard to use a specific fluke meter in a lot of documented procedures (armed forces and such) which makes no difference to you or I.
https://giphy.com/gifs/xT5LMsoq6cIBCE6UOQ