I saw others say there is a file check when you start the game. So, no.

i am not going to try... let's hope they implement it soon

same

what changes can we expect with 1.1.0.3?

found this on OCN B650E Taichi

I don't know if it is for all logofail implementations or just agesa but yeah bandwidth is down

thanks for confirming this.

Are you running bookworm? Did you follow the instructions for unbound in the PiHole Documentation or did you follow some other tutorial?

yes unbound is running, here is the unbound status. seems like theres something wrong with subnet cache

subnetcache message is not the problem. I get that message as well.

i had the same issue. It worked when i used 1234 as password. Should of course change it afterwards

I had an BOGUS issue recently on one of my 2 piholes and it turned out to be because the machine hosting the pihole (a raspi 4 in my case) had it's clock out of sync. Once I synced it the issue went away so double check that.

seems to be the issue. Happened again today. The Time was about 7 seconds out of sync. Even though the daily NTP time sync 7 hours earlier was successful.

sorry, mixed it up.

My Router is doing the DHCP part. Conditional forwarding is unticked. I named my devices via Local DNS -> DNS Records. Unbound configured as suggested by the PiHole Documentation.

Apple Mail is causing this. But i don't know why or whats going on. Does not happen when using Apple Mail on an iPhone. So maybe something is different with MacOS Sonoma 14.1.1

This confirms your Pi-hole is working properly and resolving the name to the IP you have specified.

ok that is good to know. I will take a look at wireshark. I guess it is not a „bad thing“ whats going on here?!

I get these too, it's rare, and seems completely random. It's usually on shoreline for me. I've been seeing them since way before last update though.

the ones on shoreline are different. The ones on reserve and woods habe been more like a flashlight beam or maybe like a strobe light as airplanes have them

try it with a different ssh key. I had difficulty with rsa keys...

I tried using that kind of key, but i get the same message.

no i don't think so. I checked on my dietpi installation and do not remember anything about dietpit.txt

A correction has been uploaded:

i sincerely apologize for my comment.

i wouldn't be surprised if he gets paid by AdGuard ;)

5800X3D is nice for Streets. 32GB RAM, 4090, 1440p high settings and 1.78 DLDSR -> Tarky sooo beautiful :)

Thanks for the reply

What’s the content of /etc/resolv.conf ?

congrats!

nice! Will this carry through all upcoming wipes?

Do I need GeForce experience? What are the benefits beside clips

i quit using it when an account became mandatory. Instead I use NVCleanstall to just install the driver (telemetry etc can be deactivated). If i want to record game play i use OBS.

See here:

nice!

i do ever since i installed pihole. not for security reasons but to be a bit more independent.

Is it enough upgrade from the IPS model? Have the pg279q aswell

PG279q is still a great Monitor. But no more IPS Glow, deep blacks and the better motion clarity of the AQDM make the 279q look outdated.

Sounds realy great but its a lot of money too

yeah i know, guess it is the early adopter fee...

This is not right! When you turn it of there is pixel cleaning. You can see this if you look at the power usage. It uses 22 watts for 6 minutes before shutting down completely.

not on my unit. Power usage only rises after five minutes when it is in standby.

So I’m going to RMA it my screen keep displaying remanant images , each time I open something it keep getting stuck on my screen

before you do… i have a current meter connected to my AQDM and noticed that Pixel cleaning only happens when it is in standby. After 5 minutes the W/h raise by 10. It lasts for 4 minutes, This does not happen if the momitor is powered off but still plugged in.

Has anyone experienced some image retention after the 104 update? Espeicaly when the machine is booted up. It will be gone after a few minutes. Never observe this with 103 firmware.

i have about 20 hours screen on time on 104 and have not seen any image retention so far.

I don't know how anyone has bought this thing. This display has been "sold out" since launch and now has gone from "Sold Out" to simply "Pre-Order, item coming soon!"

availability is a bit better in Europe

update Firmware to 104, install the Displaydriver and check in Nvidia Controlpanel that you have it set to 10bit

Yes, firmware was updated to MCM102 from the Asus page

102 is old. today 104 was released. Try that. Still looks like a faulty panel

i have used the PG27AQDM now for three weeks and a total of about 100 hours and had zero issues.

Just check hardware unboxed for display recommendations.

this and Monitors unboxed

Literally same ppl doing both channels XD

i know :)