Yup DG hits it on the head. There may be no better player in the league primed to managing a 2nd unit coherently, deliberately and cleanly than Chris Paul.
Yeah Livingston is exactly this philosophy personified. With him off the bench, you knew you could rely on consistent, straightforward shotmaking from your 2nd team. Fulfilled the bench's task of growing the lead or maintaining it perfectly whenever he was activated.
We had that happen in San Juan Capistrano many years ago. We were visiting someone with a home on the beach. We were walking along the shore after dinner and a man and his wife came out to tell us that it was a private beach.
Most Scottish people will immediately “tone it down” for anyone who doesn’t have a Scottish accent because we are told repeatedly that our accent is difficult. Gets to a point where you don’t bother tryna speak “naturally”, because you’re so used to being told it’s too difficult.
I've recently bought a second-hand car. The previous owner decided it was a good idea to glue the rear number plate on and let some of the glue drip down. The glue it obviously hard, and I can't seem to remove it. Any ideas? I've tried nail varnish remover, which didn't do anything
What’s the best wait to repair this crack? Got these armor body fairings for a steal because of it. It’s not on the inside, just the outside of the fiberglass, more pronounced in the picture because I was pulling on it
This! He was 2nd in 250cc one year after Simoncelli, 4th when Lorenzo and Dovi were in that category. People did really consider him an average rider but truth is he was talented and had really decent seasons even in MotoGP with satellite bikes performing over expectations. He missed the edge to be one of the greats tbh but even against current grid if you give him a decent MotoGP bike he would still perform good.
As excited as I am for this kind of bike, it seems like Kawasaki kinda shot themselves in the foot by only going halfway on this bike. Because they didn't put the manufacturing/engineering into cast aluminum frame, the weight on this is about on par with other bikes with much higher displacements-- Frankly, I'm not sure why anyone would ride a 4RR instead of an R6 (for example) since it seems like just a straight upgrade. If they had lost 30 pounds off the frame, the argument for this bike's existence becomes much more valid.
I actually talked to that guy he said that red seat was a factory option and they also had a yellow and a white I'd never seen it like that before but pretty cool huh
Only the rear gets it and the updates make it a much better bike but the brakes are still weak and it doesn’t carry its weight welll. My 890 feels and rolls like it’s a 100lbs lighter. My mt09 has ceramic wheel bearings and has been maintained exceptionally well too
Went with these. Seemed to fit fairly well. Almost went with the Forma Pro Ice but the Dainese Store had the Torque Outs available in 47. We shall see how they roll at VIR next week. Again, thanks ALL for the excellent feedback.
Nba is matchup driven and fit is more important thanks to more organic nature of the game. Take the Sabonis trade. That really unlocked the two main pieces in that trade. Should be viewed as a good standard in trades.
Yup DG hits it on the head. There may be no better player in the league primed to managing a 2nd unit coherently, deliberately and cleanly than Chris Paul.
That’s why Livingston and Iggy have been so valued.
Yeah Livingston is exactly this philosophy personified. With him off the bench, you knew you could rely on consistent, straightforward shotmaking from your 2nd team. Fulfilled the bench's task of growing the lead or maintaining it perfectly whenever he was activated.
And a much slower pace to limit opportunity to the opposing team.
Stockton Rush’s net worth is $12 million. That’s a lot for you and I, but not for lawyers.
Also they can sue the estate for negligence even with the waiver.
In order from most important:
Really addressed all the problem areas there.
We had that happen in San Juan Capistrano many years ago. We were visiting someone with a home on the beach. We were walking along the shore after dinner and a man and his wife came out to tell us that it was a private beach.
There are actually private beaches in California. They jIt have fences around them and are owned by the military.
[удалено]
Mine do this but less flecks of brown and never go anywhere near full brown. Just blue grey and an aqua green
[удалено]
With how airports are a 2.5 hr train ride is probably quicker and easier than the short haul flight
german trains are notoriously late so hopefully france has better rail service
How late are they usually? Also that seems very ungerman
Most Scottish people will immediately “tone it down” for anyone who doesn’t have a Scottish accent because we are told repeatedly that our accent is difficult. Gets to a point where you don’t bother tryna speak “naturally”, because you’re so used to being told it’s too difficult.
This is pretty true or I end up translating for people. Not a scot just an American with Scottish family.
I mean when’s the last time they did it 748/916 or wait there was a yellow 999 too. Haven’t seen it since, I think on the V4 body it looks good.
1098 was the last.
I've recently bought a second-hand car. The previous owner decided it was a good idea to glue the rear number plate on and let some of the glue drip down. The glue it obviously hard, and I can't seem to remove it. Any ideas? I've tried nail varnish remover, which didn't do anything
Goo gone is usually pretty good might have some luck with that
Building on this, they have a specific spray gel for automotive that I recommend
I didn’t know about the spray gel just the normal stuff
Oh boy I only lose 9.5k in depreciation instead of 10K!
For real. Also I buy interesting cars so the more unique the color the better for resale.
In California, stations must provide free air and water to customers.
To anyone for air. Idk about water.
What’s the best wait to repair this crack? Got these armor body fairings for a steal because of it. It’s not on the inside, just the outside of the fiberglass, more pronounced in the picture because I was pulling on it
Looks very minor to me so you might. E able to get away with just some resin filler.
I've been doing pepperoni, jalapeños, and hot honey for home pizzas lately. It's a tasty combo.
I’ve been adding garlic and hot sauce usually the truff cause it’s a bit sweeter
This! He was 2nd in 250cc one year after Simoncelli, 4th when Lorenzo and Dovi were in that category. People did really consider him an average rider but truth is he was talented and had really decent seasons even in MotoGP with satellite bikes performing over expectations. He missed the edge to be one of the greats tbh but even against current grid if you give him a decent MotoGP bike he would still perform good.
He’s a 125 world champion as well
Seems like something of a Moto GP Circuit
Looks like an alternate Catalunya. Def not a motogp track.
Finally I can use the turn signals in my first gen viper
We'll have 4 healthy quarterbacks and Darnold will be leading the charge.
As long as it’s not Josh Johnson I’m good.
Jake Moody once shot down a fighter jet by pointing at it with his finger and saying "bang"
Currently awaiting a patent and permission from the dod to sell to ukraine
The 2ct has been revised in 2016 i believe, making it a dual compound.
2ct just means dual compound. I have cup 2s on my bike and they are 2ct. Op should be more specific about which Michelin.
As excited as I am for this kind of bike, it seems like Kawasaki kinda shot themselves in the foot by only going halfway on this bike. Because they didn't put the manufacturing/engineering into cast aluminum frame, the weight on this is about on par with other bikes with much higher displacements-- Frankly, I'm not sure why anyone would ride a 4RR instead of an R6 (for example) since it seems like just a straight upgrade. If they had lost 30 pounds off the frame, the argument for this bike's existence becomes much more valid.
I agree. The only thing I can really see this bike for is someone who really wants a 400 and classes like the afm has for 450 super bike.
FWIW a S1000RR weighs 427 stock. You can drop 15lbs just doing the exhaust. So 4lbs lighter than a 1k.
Is that OEM weight or actual? The first s1krr was almost 500 with a. Full tank stock.
I actually talked to that guy he said that red seat was a factory option and they also had a yellow and a white I'd never seen it like that before but pretty cool huh
Interesting. I knew the red seat option but not the others.
Green hell
Even with the SP getting adjustable Öhlins suspension?
Only the rear gets it and the updates make it a much better bike but the brakes are still weak and it doesn’t carry its weight welll. My 890 feels and rolls like it’s a 100lbs lighter. My mt09 has ceramic wheel bearings and has been maintained exceptionally well too
Hmmmm. Kk. I have a test ride set up with Motor Cafe in Campbell in a couple weeks. Will hold off purchasing till I try out the 890.
Nice. Buddy bought a 790 there. If my local dealer didn’t have one that’s where I was going to go.
Went with these. Seemed to fit fairly well. Almost went with the Forma Pro Ice but the Dainese Store had the Torque Outs available in 47. We shall see how they roll at VIR next week. Again, thanks ALL for the excellent feedback.
Little surprised but they’ve been good for me.
Do you think they’re gonna homologate a sport bike for the market?
Not unless it’s a naked. The faired sports bike is a failing segment in terms of sales.
It works for niche brands, like Ducati, Aprilia, and MV.
To a degree. Fully faired sports bikes sales are dropping every year
Yeah the funniest one is when As/Raiders fans are downvoted on
People do that? Like damn most warriors fans I know are raiders fans.
I still find it inconceivable how Sacramento has passed up on so many elite players in the first round.
Nba is matchup driven and fit is more important thanks to more organic nature of the game. Take the Sabonis trade. That really unlocked the two main pieces in that trade. Should be viewed as a good standard in trades.