Right. I have a similar one with the hensoldt optic. I just cannot find a gunsmith to do that or import a non-“heavy” barrel to BC. Thanks for the info though, any chance your gunsmith who did the barrel is here?
very much so. it's a nice scope for the price range. also tried the primary arms glx 2-10, atibal 1-10, and the sig bdx 2-12. i had switched up in mag range from the kahles 1-6 and 1-8 but realised having a 1x min range is kinda dumb considering i have a canted red dot. you can shoot on 2.5 or 3x magnification pretty comfortably and quickly, all things considered.
i have not - I had purchased one stateside and it'll find its way up here when i get a chance. i did manage to get a bit more time on the new and upgraded 2.5-10 NF NXS. although they have mostly fixed its eyebox / eye relief issues, it still tunnels a bit at 10x and has horrible fisheye starting at 5x and gets actually horrible at 2.5x to the point where it straight up becomes jarring to use.
Don't ask them if they are unvaxxd. Ask them what their opinion is on the Vax and the governments reaction too covid. If he's against it all it will be easy to tell. Don't imply the answer your looking for when asking the question .
Want an ar stock on that? Get a tommy build ump buffer tube adapter. It fits right on that Hinge and is more in line with the bolt carrier compared to other buffer tube setups I've seen on an apc before .
Very interesting. Thank you. Would you recommend this material for Warhammer 40k figures, or should I use something different. I'm very new, too 3d printing
This material is more for very strong parts, if you’d like to make figure or miniatures, I highly recommend resin printing. It’s more tedious work but it is very precise. The layer height can get down to 10 microns.
ten days with Hyundai Santa Fe was $850
Usd ?
How did you source the barrel for this build? Where? How?
It's an sl8 barrel chopped down to 18.5 inches, then threaded, with a muzzle device put on it.
Right. I have a similar one with the hensoldt optic. I just cannot find a gunsmith to do that or import a non-“heavy” barrel to BC. Thanks for the info though, any chance your gunsmith who did the barrel is here?
Rdsc may take on that work. Try emailing them or dlask
First people said the camp was 10k then 15k now 18k lmao
Cerakote could be binding on your BCG? I've heard of this happening on M4s with cerakote jobs before.
BCG is what
Bolt carrier group
very much so. it's a nice scope for the price range. also tried the primary arms glx 2-10, atibal 1-10, and the sig bdx 2-12. i had switched up in mag range from the kahles 1-6 and 1-8 but realised having a 1x min range is kinda dumb considering i have a canted red dot. you can shoot on 2.5 or 3x magnification pretty comfortably and quickly, all things considered.
Have you tried a trijicon credo 2-10?
i have not - I had purchased one stateside and it'll find its way up here when i get a chance. i did manage to get a bit more time on the new and upgraded 2.5-10 NF NXS. although they have mostly fixed its eyebox / eye relief issues, it still tunnels a bit at 10x and has horrible fisheye starting at 5x and gets actually horrible at 2.5x to the point where it straight up becomes jarring to use.
Very interesting thank you for the Info
I wish I could tell you friend, I don’t have a grams scale to get an exact number. Best I can give you is that it is actually noticeably lighter.
Thanks for the info 🫡
Haha just kidding, managed to dig out a forgotten scale. You’re looking at 200 grams vs 245 grams roughly, new vs old.
Fuck yeah thank you sooo much
Fakecog af
How are you liking the credo 1-8?
Soak your food in LSD. You'll find out who's stealing your food real fast
Don't ask them if they are unvaxxd. Ask them what their opinion is on the Vax and the governments reaction too covid. If he's against it all it will be easy to tell. Don't imply the answer your looking for when asking the question .
Get a valmet
1-6 on a 308? Am I wrong ?
You’re right. From what I heard it’s because the Brass didn’t want a too powerful scope due to being afraid some soldiers would “play sniper” with it.
Interesting, thanks for the info
What dose this attach too? Direct thread or too a muzzle device
What optic do you have ?
May the odds be ever in your favor
Bunch of un happy geese
Massive W . Fuck Satan
Hit by a train saving his girlfriend who got stuck on the tracks. They both didn't make it.
Fuck. How old were they? This must be the worst one
Shotgun suicide. Another one got crushed by a tugboat when it was docking. The 3rd hung himself.
Earplugs when your sleeping is your friend
In a time of doctor shortages, firing one sure isn't a good idea
Want an ar stock on that? Get a tommy build ump buffer tube adapter. It fits right on that Hinge and is more in line with the bolt carrier compared to other buffer tube setups I've seen on an apc before .
You do, I used a convection oven at 100°C for 24 hours, then while it was printing, I had it at 55°C to try to keep it dry
Very interesting. Thank you. Would you recommend this material for Warhammer 40k figures, or should I use something different. I'm very new, too 3d printing
This material is more for very strong parts, if you’d like to make figure or miniatures, I highly recommend resin printing. It’s more tedious work but it is very precise. The layer height can get down to 10 microns.
Thank you !
Very nice , what type of printer did you use?
Slap a tommy build ump too buffer tube adapter on that thing if you want an inline buttstock
When will this be voted on?