Peak gaming days. I'd play either MW2 or Halo 3 depending on which friends were online. Even bought the real life version of the MW2 throwing/tac knife
What specific chemicals are you looking to purchase? Depending on their nature, by looking into some more specific uses you could find great suppliers, Ive purchased a variety of high quality chems from fireworks suppliers, biodiesel processing suppliers, etc in the past and a hardware store is a good local starting point for some, or walmart, you can purchase high purity lye,sulfuric acid, iodine, just look at what you're wanting to do and use your judgment on what's the best option.
Rn i'm having to buy new glass equipment, making anything will have to wait. But i'm tempted to make cinnamon flavoring like in NileRed's recent video...minus the 2 fancy very expensive machines he used of course.
Nice I'll have to check that out and see what it calls for later, if I can personally recommend any sources I'll definitely let ya know. Have you already ordered your glassware? If not I've had a decent experience with Amazon before, as long as you treat it well it was more resilient than I'd anticipated for as cheap as it was.
The previous beaker set i bought was from a brand called "Karter" i bought on amazon. Had one pop and shatter during an experiment. Also the bottoms on a couple of them were uneven by a small amount, lol.
You know what you must do. Walk to the nearest bug hive and hellbomb yourselves. To kill some bugs for super earth!!! MAKE RICO PROUD HELLDIVERS!!! FOR SUPER EARTH!!!
First off I don't know how you could end up with "diagonal" bricks. That statement makes me hesitant to explain this as it sounds as if I'm missing something.
The diagonal part is in case i fucked up the alignment some how when messing with my miniature bricks and forcing it to work out, lol. I'm not doing regular construction project, just miniatures with bricks that are only millimeters in size.
But to explain it assuming you are planning to lay bricks in regular courses I'll add this: If you are using a "modular" brick it is 7 5/8ths inches. With a 3/8ths inch joint it lays at 8inches.
Some are in former warsaw pact states and in civilian markets, especially the American civilian gun market. I'd saw a few 100k are missing from RU stocks.
If you are going to fight someone with a metal hammer, 16ga., if properly made and shaped will be exactly what you want. 18ga and lighter will not take that hammer hit.
Iirc they do a paper card for fingerprints and send that in, which is insufferable imo cuz longer wait time. I'd rather just do the form 4 on eforms myself so i can use my Printscan fingerprint file.
I have two rifles I assembled out of Aero Precision parts, I'm pretty happy with them. One is an AR-15, the other is an AR-10 in 6.5 CM, they perform as advertised. Haven't tried their 300 BLK uppers.
Built my first .300BLK sbr a couple weeks ago. Used Aero Precision upper & lower receiver, Aero Precision Atlas handguard, Ballistic Advantage 10.3" Hanson Series barrel, and a Fail Zero nickel boron bcg.
Sending in large numbers fearless brittle-ish soldiers like the Cairnomorphs would force let's say a defending unit of enemy troops, to burn through ammunition very fast and possibly run out. The defenders would be forced into hand to hand combat instead of ranged which is a lot more stressful, harder, tiring, and gruesome. This would also inflict disorientation and panic among the defenders, could cause a retreat in that area(or not if they choose to fight to the last man). The whole thing would be a fear factor for the enemy and dropping morale especially if they don't have the same capability to use against the attacking force.
My god he’s showing off his extremely rare short wait time and he doesn’t even have a muzzle device to take advantage of it, what a waste. Why him o lord and not me?!?
I think I was in-game when this dropped. Went into a match and there was nothing then got back to the ship and saw the message.
How many mags does the hmg get?
Constructed in an unorthodox fashion
Not built different; it's just wrong in every way.
-TheRussianBadger (?)
From his l4d2 video yeah
Christ, lmao. I didn't see that one. Been there though, a while back put an Amazon dot on a SPAS-12 for the MW2 vibes. Recoil made short work of it
I made a post on here and
Peak gaming days. I'd play either MW2 or Halo 3 depending on which friends were online. Even bought the real life version of the MW2 throwing/tac knife
Lol cool.
What's going on?
Kinda looks like IDF room clearing and someone on the other side of a door opens up through the door at them.
"Austrian painter shocks the world!"
Data transfer complete.
What specific chemicals are you looking to purchase? Depending on their nature, by looking into some more specific uses you could find great suppliers, Ive purchased a variety of high quality chems from fireworks suppliers, biodiesel processing suppliers, etc in the past and a hardware store is a good local starting point for some, or walmart, you can purchase high purity lye,sulfuric acid, iodine, just look at what you're wanting to do and use your judgment on what's the best option.
Rn i'm having to buy new glass equipment, making anything will have to wait. But i'm tempted to make cinnamon flavoring like in NileRed's recent video...minus the 2 fancy very expensive machines he used of course.
Nice I'll have to check that out and see what it calls for later, if I can personally recommend any sources I'll definitely let ya know. Have you already ordered your glassware? If not I've had a decent experience with Amazon before, as long as you treat it well it was more resilient than I'd anticipated for as cheap as it was.
NileRed turns styrofoam cups(polystyrene) into cinnamon oil to flavor candy he makes at the end.
The previous beaker set i bought was from a brand called "Karter" i bought on amazon. Had one pop and shatter during an experiment. Also the bottoms on a couple of them were uneven by a small amount, lol.
Mistake #1 is buying on amazon. Get stuff on eBay, used, from one of the above brands.
Ok cool, thx for the advice!
Mel Gibson said "FREEEEEDOMMM!!!" right before he was executed by the british when Scotland tried to fight for their independence.
You know what you must do. Walk to the nearest bug hive and hellbomb yourselves. To kill some bugs for super earth!!! MAKE RICO PROUD HELLDIVERS!!! FOR SUPER EARTH!!!
Dark Brandons wrath is never stopped, only delayed
No, it arrives when it means to.
Um, OP said less than $300
He's fine. Seeing what ppl prefer gives me a good idea on what might be something to look into later on.
Lol I paid more for my Eotech 3x than I did for my Glock.
Ouch. Lol
If you're going to fire it, plz don't let it crack or explode in the kiln. Lol
First off I don't know how you could end up with "diagonal" bricks. That statement makes me hesitant to explain this as it sounds as if I'm missing something.
The diagonal part is in case i fucked up the alignment some how when messing with my miniature bricks and forcing it to work out, lol. I'm not doing regular construction project, just miniatures with bricks that are only millimeters in size.
But to explain it assuming you are planning to lay bricks in regular courses I'll add this: If you are using a "modular" brick it is 7 5/8ths inches. With a 3/8ths inch joint it lays at 8inches.
Thx!
Would mean that they already gave out all ppsh and Mosin Nagant ... 😅
True, but didn't the ussr literally make millions of them? Lol
Corruption is the key here . Cant Tell how much "got lost " over time
Some are in former warsaw pact states and in civilian markets, especially the American civilian gun market. I'd saw a few 100k are missing from RU stocks.
If you are going to fight someone with a metal hammer, 16ga., if properly made and shaped will be exactly what you want. 18ga and lighter will not take that hammer hit.
Where do you suggest i should pickup some 16ga breastplate armor? Just trying to see what the general consensus is.
Where are you?
US
Nah they just send those emails for fun
U serious or you trolling me? Lol
Usually your dealer can do the prints and send them in, talk to the dealer and ask them
Iirc they do a paper card for fingerprints and send that in, which is insufferable imo cuz longer wait time. I'd rather just do the form 4 on eforms myself so i can use my Printscan fingerprint file.
I see useless goddess, does that mean your sbr is useless too? :v)
I have two rifles I assembled out of Aero Precision parts, I'm pretty happy with them. One is an AR-15, the other is an AR-10 in 6.5 CM, they perform as advertised. Haven't tried their 300 BLK uppers.
Built my first .300BLK sbr a couple weeks ago. Used Aero Precision upper & lower receiver, Aero Precision Atlas handguard, Ballistic Advantage 10.3" Hanson Series barrel, and a Fail Zero nickel boron bcg.
NO, NO: JAMES FRANCIS RYAN!
You're gonna have to speak up a german grena-
Cairnomorphs sounds awesome. Good call
It does yeah. Thanks!
I think it's too deep into our exchange for anyone other than me to read it and I don't mind. Your consideration is very kind, though. Well said.
Sending in large numbers fearless brittle-ish soldiers like the Cairnomorphs would force let's say a defending unit of enemy troops, to burn through ammunition very fast and possibly run out. The defenders would be forced into hand to hand combat instead of ranged which is a lot more stressful, harder, tiring, and gruesome. This would also inflict disorientation and panic among the defenders, could cause a retreat in that area(or not if they choose to fight to the last man). The whole thing would be a fear factor for the enemy and dropping morale especially if they don't have the same capability to use against the attacking force.
Apparently the ATF needs to start asking what optic you’re going to be using before approving form 1s.
Hahahaha. I like how some of you are losing your minds over my temporary optic. Lol
My god he’s showing off his extremely rare short wait time and he doesn’t even have a muzzle device to take advantage of it, what a waste. Why him o lord and not me?!?
Lmao.