Pad has plenty of life left but the rotor is cooked. Because of that you should replace the pad too. Also you may need new calipers because it looks like they are seized up
Honestly, the best way to go about this is dropping the tank and welding, but in the future just remember that using the right tools makes a job a lot easier. If you don’t have the right tools, don’t attempt it. An impact would have ripped that bolt out of there like nothing.
Doesn’t matter if your lug nuts are torqued to spec, your wheel hub is going to fly off any moment and your gonna have to pay a LOT more than you already have to
The headlights are not on in this video, but the corner lights are some switchback bulbs I found on Amazon (I wish I could tell you what kind but I’ll never find it, and the fog lights are raxiom bulbs meant to fit the GT fog lights, but I rigged them to fit my cobra fogs
Deleting all your comments so nobody sees how pathetic you are? And I know damn well I’m burning the shit out of my valves. I’m running this motor into the ground because I can. I have 3 more just like it in my garage that I can’t wait to burn the valves on more. Happiness > money
Dude what are you doing? Are you so lonely you have to come try to make yourself feel better by bashing on people? It's okay dude it's okay to be lonely now leave me alone and go fuck yourself
Hot licks flamethrower exhaust kit. Look it up. I’ve done it in the past. I know WHERE the ignition wire is, and I know HOW to do it. I’m asking where the best spot to cut would be, otherwise I’ll just wing it.
If you know your underpaying for a car, please don’t get a jeep. Or a ford, or a Chevy, or dodge. Get a Honda or Toyota or something like that because you can rely on them to get you where you need to go regardless of the miles
Pad has plenty of life left but the rotor is cooked. Because of that you should replace the pad too. Also you may need new calipers because it looks like they are seized up
Wheel setup in the front?
Honestly, the best way to go about this is dropping the tank and welding, but in the future just remember that using the right tools makes a job a lot easier. If you don’t have the right tools, don’t attempt it. An impact would have ripped that bolt out of there like nothing.
Doesn’t matter if your lug nuts are torqued to spec, your wheel hub is going to fly off any moment and your gonna have to pay a LOT more than you already have to
OFR X pipe no cats no mufflers. Gotta make sure everyone knows the 2v is superior
Your brake calipers may be seized or hopefully just need to be cleaned.
I lift from the diff and the frame. My pinch welds bend when I lift from there
Yes it will work. I have the same wheel size and I’m lowered to the absolute max. Like, absolute max
same offset and such?
Yeah I’m either +15 or +20
Mystichrome 2004 SVT cobra
I would just get raxioms. It’s the same price and they are very bright and white
What kinda lights u got? They look nice and bright. Also nice donuts 😎
The headlights are not on in this video, but the corner lights are some switchback bulbs I found on Amazon (I wish I could tell you what kind but I’ll never find it, and the fog lights are raxiom bulbs meant to fit the GT fog lights, but I rigged them to fit my cobra fogs
[удалено]
Deleting all your comments so nobody sees how pathetic you are? And I know damn well I’m burning the shit out of my valves. I’m running this motor into the ground because I can. I have 3 more just like it in my garage that I can’t wait to burn the valves on more. Happiness > money
[удалено]
[ Removed by Reddit ]
You need new calipers. You also need a new car. That thing sounds like it might not make it home. But definitely get all new brakes
Pliers and cross your fingers real hard
V6 but it’s pretty clean
SR performance sells a pretty good one for a low price, but it really doesn’t matter on 2 valves unless you have some crazy build
Dude it's just an idea and I don't need you telling me what to do with my car. I went to UTI but never finished the courses.
“I went to UTI” is a telltale way to tell everyone your an idiot.
Dude what are you doing? Are you so lonely you have to come try to make yourself feel better by bashing on people? It's okay dude it's okay to be lonely now leave me alone and go fuck yourself
No, I just really hate Camaros. And I love seeing camaro owners cry like a little fatherless bitch
I agree that you have no idea what you're doing and really shouldn't be doing.
Hot licks flamethrower exhaust kit. Look it up. I’ve done it in the past. I know WHERE the ignition wire is, and I know HOW to do it. I’m asking where the best spot to cut would be, otherwise I’ll just wing it.
A quick look told me what I needed to know. You're an idiot. Don't fucking cut wires to your coils.
Lower it and fix the wheel gap in the back with wider tires
It's a "bullet" for snorting snuff, cocaine, etc.
Really!? I assumed it was for already grinded weed to easily fill a joint or a bowl. But I’m not 100% sure
Men
Do you live under a rock? Ripped jeans have always been popular
Popular? Sure. Cool? Absolutely not. Your username says it all
The homophobes are evolving
I’m not a homophobe. Just calling you a loser. But the other bit makes it funnier
If you know your underpaying for a car, please don’t get a jeep. Or a ford, or a Chevy, or dodge. Get a Honda or Toyota or something like that because you can rely on them to get you where you need to go regardless of the miles