1. But Bank Account, have you seen how cheap old Core i7s have gotten? I know I haven't used that old computer in the corner for a few years, however, I think it's just because the i5 in it was too slow. It's not that I already have 4 computers just for myself, and I have no need for a 5th one.

  2. I can spend $20 on amazon to buy some chinese garbage reader that will connect via USB. No need to keep a whole decrepit-ass old computer on hand.

  3. Yes you can, the point is that I didn't have to. It's just nice to be able to reuse something instead of buying more garbage that will inevitably end up in a landfill

  4. Thanks mate 3 years later this helped. BTW I hate that the other guy was telling you to select the line it's like obviously lol

  5. I am experiencing the same thing, can you confirm that your game is still stable after disabling xmp or did it flatline again?

  6. I tried downclocking my ram from 3266 to 3133 and it seemed to work for me, crashed multiple times in the first hour but didn't in the second hour after changing the clockspeeds

  7. I completely disabled xmp and was able to play for an hour without getting a crash. I think it's ridiculous that the game has been out as long as it has and there are issues like this. I played the new Avatar game like it was my day job completely maxing out my build and had zero crashes.

  8. Yeah idk atleast the game is playable now, clocking down my ram by 100 mhz doesn't make such a huge difference anyways

  9. That is a good question. I don't feel much of a difference on the hot days, but it is a stock swaybar on an 1984 Volvo sedan, so I mainly did it to see if it could be done and not for the handling bonus.

  10. I've been running TPU swaybar bushings for a few months aswell on my miata, holding up fine, I have no doubt they will last a while. What I'm curious about is whether or not it'll hold up as regular suspension bushings. Poly bushings can get quite expensive so printing my own would be pretty cool

  11. Ha, sure. On gnome there isn't a clipboard manager by default, I use an extension called "Pano clipboard manager" to get this functionality

  12. Ja, je noemt alleen de slechte voorbeelden. Wat van de goede voorbeelden?:

  13. Die Hitler was ook zo'n goede man, meer mensen moeten daar een voorbeeld aan nemen

  14. Dit gaat een herhaling worden van 2012. Geert kan niet onderhandelen, hij blijft zich als oppositiepartij gedragen. Dat heeft hij toentertijd al laten zien. En bij de eerste de beste zware beslissing waar alle regeringspartijen moeten inleveren, zal hij de boel weer laten klappen. Ik denk dat we binnen 2 jaar weer bij de stembus staan. Misschien volgend jaar alweer.

  15. Ik hoop het echt, ik kan niet geloven dat het met Wilders goed gaat komen en ik snap ook niet hoe zoveel mensen op hem kunnen stemmen.

  16. Changing it to USB-C 2.0 hasn't been as big a lift as I thought. I'm going to run it by someone who can double check me, but I'm planning to order some with the run of micro boards.

  17. Haha, you've already done it? Wasn't expecting that

  18. I forgot that I did a lot of the groundwork a while back, but I am going to have to get creative with the actual usb connector since the one I originally designed it for is no longer available.

  19. Haha awesome, looking forward to it!

  20. Not true. There is no way to unlock extra cores in 5700 with BIOS flash - they are hardware disabled. With BIOS flash you can unlock core clock though, so you will gain around 200-250 MHz.

  21. There definitely were a few early models which could get the cores enabled, but most couldnt

  22. All 5700s were the same chips as the 5700xt, but with some of the SPs disabled (and lower clocks.) There's no way to reenable them that I know, but if you flash the 5700xt bios it will allow for higher power and clock speeds when overclocking in the AMD control panel.

  23. When I still had my 5700, I could max out all the sliders and it wouldn't even make a noise, so I flashed an XT bios and I could still max out the slider with just a bit of noise. Great card that was, was planning to mod the bios to allow even more overclocking but then I sold it for way too much money

  24. necro comment: would you mind explaining what the -S means?

  25. I think it means Sync or something

  26. Make sure your belts and V-wheels aren't too tight or too loose. I'm running at 2500 acceleration at the moment, should be doable for you too

  27. My belts were pretty tight but after loosen them slightly still no change in quality.

  28. I'm not completely sure, my X also performs worse than Y, so it's not just you. How smooth does your hotend move when the belts are off?

  29. Thanks for the reply! That's a nice upgrade you got there!

  30. It sounds like you are on the right track and I wish I could be more helpful although after this project I worked on an Anet A8 replacing a fried stock board with an MKS board which had its own similar challenges of headers, pins, and configuration and its all blurring together now.

  31. Haha it's okay, I think I'll be able to figure it out.

  32. Anderhalf jaar, langer dan verwacht om eerlijk te zijn

  33. I stopped looking for an answer unfortunately, I haven't actually needed it as all my school work is done through OneDrive (yuck) anyways, so I stopped looking.

  34. The blackouts are stupid; I've been using reddit for 10 years and never heard of the third party apps until recently

  35. You might not've used one, but the mods moderating your favourite subreddits definitely have and without them it wouldn't be nearly as much fun

  36. In case this post was serious and not a joke because of the cat, you might've left the plastic film on the cpu cooler between the block and cpu

  37. I've been thinking about Xiaomi Curved 34, but I'm slightly scared of a VA panel. I don't care about refresh rates, but I do care about color accuracy and viewing angles. Also - budget is kind of tight. I'm willing to shop second-hand.

  38. Honestly I'd avoid VA, there's a few good options in the €400-500 range, they just aren't curved. I like my HP X34, very good panel for the price

  39. Thanks. Curved isn't necessary, I just need ultrawide.

  40. There's also the Gigabyte M34WQ, which has good reviews and has a built in kvm-switch, if that's your thing

  41. Yep!, it's from Creality for sure if it is warped. I Fixed mine by ripping it off and throwing it away. I replace the warped cariage and the bed from GCR Gulfcoast Robotics and have never looked back.

  42. Lol a class action lawsuit for what?

  43. SA profiles but with Colemak support? Where’d you find those?

  44. Maybe he shouldn't assume it was deliberate as it's easy to make such a mistake there. And even if it was deliberate, retaliation should not be his first thought

  45. Have you already installed content manager? If you didn't do that first, than go to Patreon and subscribe to

  46. In a few weeks the steam sale will be on, then you can get all the dlc for literally a few bucks

  47. Does the light on the probe start blinking?

  48. Plus the wording on the settings for opting out of the redeisgn.

  49. That made me think that they knew new Reddit wasn't as good as they'd like and would work to improve it, now however many years have passed, nothing changed

Leave a Reply

Your email address will not be published. Required fields are marked *

News Reporter